Basic Info.
Type
Micro-Computer Control Automatic Diesel Generator
Output Type
AC Three Phase
Excitation Mode
AC Rotating Exciter
Voltage
127/220V;110V/220V;220V/380V,230V/400V,240V/415V
Controller
Smargent/Deepsea/Comap
Rated Output
400kVA /320kw
Warranty
1 Year or 1200 Hours
Transport Package
Wooden Case
Specification
CE, ISO9001
Origin
Fuan City,Fujian Province,China
Product Description
Cummins Series Diesel Generator Set is a set of complete equipment for electrical power supply. Cummins engines and high quality alternators and advanced full automatically control system are produced through strict test, which together provides reliable power no matter as standby, prime or continuous use.
Genset specification:
Engine: Cummins (KTA19-G4)
Alternator: Stanford(HCI544C )
Control panel: Digital display with ATS. (Smartgen brand)
Prime power: 500kVA/400kw
Frequency: 50Hz/60Hz
Phase: 3phase, 4wire, 12leads
Power factor: 0.8lagging
Supply Scope
1.brand-new engine, with start motor.
2.brand new brushless alternator, single bearing, flange connection, IP23, H insulation class, with AVR.
3.Heavy duty steel channel base frame.
4.Heavy duty industrial type silencer with flexible bellow.
5.Vibration damping supports between Engine/Alternator and base frame.
6.Radiator with safety guard.
7.Automatic strat control panel, Smartgen brand HGM6110 model as standard supply.
8.High capacity lead acid battery c/w battery cables.
9.3-pole output circuit breaker.
10.Below 500KW, skid-mounted bottom fuel tank for 8hrs full load as standard supply. Above 500kw, storage fuel tank is provided at extra cost.
11.Standrad tool kits and complete operation/maintenance/manuals to Engine/Alternator/control panel,etc.
12.Optional supply: a) Remote start / Auto mains failure(AMF) / ATS(automatic transfer switch) control panel, b) Soundproof / Weatherproof canopy, c) Mobile trailer, d) Auto load sharing, synchronizing panel and load sharing.
Control panel :
1 a) Automatic alarm system: the unit has the acousto-optics alarm system and arrestor for any situation as the start defeat, the water is over temperature, the oil pulls down, over speed, over load and over current
b) Operation display:
i) Unit voltage, tri-phase load current and frequency display
ii) Water temperature, oil pressure display
iii) Fuel level, fuel temperature display
iv) Audible and visual alarm lamps and buzzers
2 Starting system: DC alternator is used to start engine
3 Short circuit protection: MCCB air switch
4 Cooling system: combined cooling water tank fitted to meet the requirement of radiation at ambient temperature 40°C.
Sound proof canopy:
1)With steel sheet
2)Stainless steel locks
3)Control panel viewing window for monitoring the status of the generator set
4)Good ventilation system and anti-heat radiation construction
5)Effective anti-vibration devices to ensure the generator set run steadily
6)Super silent materials inside to ensure the noise lower than 70 dB 7 meters away
7)Emergency stop button mounted outside
8)Side lockable door easy for maintenance and installation
9)Lube oil and cooling water drains piped to exterior of the canopy
Commercial Conditions
1.Port of loading: Fuzhou port
2.Port of destination: to be informed
3.Delivery time: 15-40 days after down payment
4.Payment terms: T/T 100% down payment or 30% deposit, 70% before delivery out of factory
5.Insurance: 110% of total amount
6.Failure Remedy: free spare parts due to failures cause by the quality
Warranty
The goods are under warranty against defects in material and workmanship for a period of 12 months or 1000 hours, whichever come first from the date of delivery to the end user except the damageable spare parts of genset caused by incorrect man-made operation, and that the aforementioned warranty for the same taken is back up by the engine and alternator suppliers
400KVA /320KW Cummins diesel generator |
MODEL | MDCC- 400KVA |
Prime Power(50HZ ) | 320KW / 400KVA |
Standby Power(50HZ ) | 360KW / 450KVA |
Engine technical date |
Manufacturer/Model: | CCEC Cummins NTAA855-G7, 4-cycle |
Air Intake System: | Turbo, Air/Air Cooling |
Fuel System: | PT type fuel pump, EFC |
Cylinder Arrangement: | 6 in line |
Displacement: | 14L |
Bore and Stroke: | 140× 152(mm) |
Compression Ratio: | 14.0: 1 |
Rated RPM: | 1500rpm |
Max. Standby Power at Rated RPM: | 377KW |
Governor Type: | Electronic |
Exhaust System |
Exhaust Gas Flow: | 1150L/S |
Exhaust Temperature: | 451° C |
Max Back Pressure: | 10kPa |
Air Intake System |
Max Intake Restriction: | 6.22kPa |
Buring Capacity: | 510L/S |
Intake Flow: | 8180L/S |
Fuel System |
100%(Prime Power) Load: | 206.7 g/Kw. h |
75%(Prime Power) Load: | 208.7g/Kw. h |
75%(Prime Power) Load: | 215.7 g/Kw. h |
Oil System |
Total Oil Capacity: | 38.6L |
Oil Consumption: | 0.24L/H |
Engine Oil Tank Capacity: | 36L |
Oil Pressure at Rated RPM: | 241-345kPa |
Cooling System |
Total Coolant Capacity: | 63.9L |
Thermostat: | 82-94° C |
Max Water Temperature: | 96° C |
| |
Alternator brand | Stamford |
Alternator Model | HCI444F |
Continous Output | 400KVA /300KW |
Connecting Type: | 3 Phase and 4 Wires, " Y" type connecting |
Power efficiency | 94.50% |
Voltage Regulation | ± 1.0% with engine governing |
Waveform Distortion | No load ≤ 1.5% and non-disttorting blanced linear load ≤ 5% |
THF/TIF | < 2% / < 50 |
Open Type | Soundproof Type |
Overall Size: 3250(mm)× 1100(mm)× 1850(mm) | Overall Size: 4235(mm)× 1460(mm)× 2150(mm) |
Weight: 3200kg | Weight: 4250kg |
Address:
Saiqi Industrial Area, Fuan City, Ningde, Fujian, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery
Company Introduction:
FUJIAN XINMIN MOTOR Co., Ltd. is one of a professional manufacturer of electric motors, diesel generating sets, gasoline generating sets and generators etc and was established in 1989. More than 95% products are mainly exported to America, Middle East, Africa & Southeast Asia countries and regions., with the sales revenue up to RMB 100 million. It holds 40000 square meters area, over 700 employees, modern production lines, and advanced production equipments valued more than RMB100 millions. Meanwhile, MINDU found export departments in Fuzhou and Hangzhou City.
The company not only assembles the goods but also produce the spare parts, therefore the products are most competitive in the market. The company & their products are satisfied with the clients because of their high technological power, integrated testing equipments, normative management, operation system and the policy of "first quality, first service and first credit"